XM Truck Antenna
XM Approved!
Patent Pending
Best selling truck antenna at www.myradiostore.com!
Specifications (Preliminary)

Electrical Specifications

Antenna
Frequency:                            2332.5 to 2345.0 MHz
Gain:                                     2 dBic, min (20-60 deg elevation)
                        -2 dBi (horizon)
Bandwidth:                            12.5 MHz
Impedance:                            50 ohms
Polarization:                           LHCP (20-60 deg elevation)
                         Linear (Horizon)

Low Noise Amplifier
Gain:                                     30 dB, typical
Noise Figure:                         0.9 dB, maximum
DC Bias:                                 4.5 Vdc, nominal
Current Drain:                        50 mA, maximum
Filter Attenuation:                  40 dB, minimum

Cable
Type:                                      RF Coaxial
Length:                                   15.5 feet
Outer Diameter:                      0.1 in
Connector:                              SMB

Mechanical Specifications

Antenna
Height:                                      9.5 inches
Radome Diameter:                   0.82 inches, max
Radome Material:                     Black Polycarbonate

Mounting Hardware
Right Angle Bracket:                Stainless Steel
Connecting Bracket:                Stainless Steel
Screws, Nuts, and Washers:    Stainless Steel

Rated Wind Velocity:                150 mph, fatal velocity
Weight:                                     0.25 lb (with no cable)
                                           
Other Specifications

Temperature:                            -40 °C to +105 °C, operating
                             -45 °C to +120 °C, storage

Quality and Performance Tests

XM Approved:         `                  Per Specification
                          XM-TEC-3-0009-2-RD
Illustration below:
Model with 6-in
extension